3 Coasters One after another... plz help

macho2000 · Newbie Joined: 14 Oct 2006 Posts: 1

hi, i have had 3 coasters continuously. the same media used to work earlier. its a local DVR-R. i have used it earlier of the same batch. but now i have no idea whts happening. Nero's info tool says its a FUJIFILM DVD-R. below are the 3 logs from nero .... plz someone help me figure out whats wrong.... i'm not very keen on firmware flashing unless i'm sure it will solve my problem. all the time the problem has been at the end when lead-in & lead-out are written... in case any other info is required plz let me know... i need help real bad... & thanks for even readying this... _____________________ LOG1 ------------------------------------- 1C80-0000-19E5-MA2X-4003-4074-**** Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.2.7.0 Internal Version: 7, 2, 7, 0 Recorder: <SONY> Version: BYS2 - HA 1 TA 1 - 7.2.7.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <VR0315B>Version: 2.0B - HA 1 TA 2 - 7.2.7.0 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: Off CdRomPeripheral : SAMSUNG CD-ROM SH-152A atapi Port 0 ID 1 DMA: Off CdRomPeripheral : SONY DVD RW DW-D22A atapi Port 3 ID 0 DMA: On CdRomPeripheral : VR0315B MBE331S 2.0B vaxscsi Port 4 ID 0 DMA: Off === CDRom-Device-Map === SAMSUNG CD-ROM SH-152A H: CDRom0 SONY DVD RW DW-D22A I: CDRom1 VR0315B MBE331S J: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 750MB (768748kB) Free physical memory: 225MB (230408kB) Memory in use : 70 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.9.2006 ISO compilation 6:02:13 PM #1 Text 0 File Isodoc.cpp, Line 6440 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 6:02:13 PM #2 Text 0 File ThreadedTransfer.cpp, Line 540 ReadBuffer-Pipe got 262144KB of Memory 6:02:13 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 6:02:13 PM #4 Text 0 File Writer.cpp, Line 113 Writer I: SONY DVD RW DW-D22A running 6:02:13 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 6:02:13 PM #6 Text 0 File Burncd.cpp, Line 3405 Turn on Disc-At-Once, using DVD media 6:02:13 PM #7 Text 0 File DlgWaitCD.cpp, Line 298 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2219375 (493:11.50, 4334MB) 6:02:13 PM #8 Text 0 File DlgWaitCD.cpp, Line 310 Write in overburning mode: NO (enabled: CD DVD) 6:02:13 PM #9 Text 0 File DlgWaitCD.cpp, Line 2842 Recorder: SONY DVD RW DW-D22A, Media type: DVD-R Disc Manufacturer: FUJIFI - LM03 Disc Application Code: 64, Disc Physical Code: 193 6:02:13 PM #10 Text 0 File DlgWaitCD.cpp, Line 482 >>> Protocol of DlgWaitCD activities: <<<6> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2219376 blocks [I: SONY DVD RW DW-D22A] -------------------------------------------------------------- 6:02:13 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1063 Prepare recorder [I: SONY DVD RW DW-D22A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4545282048, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2219376 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2219376 | 0 | 0x00 2219376 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 6:02:13 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 6:02:13 PM #14 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 6:02:13 PM #15 Text 0 File Burncd.cpp, Line 4236 Cache writing successful. 6:02:13 PM #16 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 6:02:13 PM #17 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 8x (11,080 KB/s) 6:02:13 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2722 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:02:14 PM #19 Text 0 File DVDR.cpp, Line 2965 Recording mode: Sequential Recording Mode 6:02:14 PM #20 Text 0 File DVDR.cpp, Line 3121 Start write address at LBA 0 DVD high compatibility mode: Yes 6:02:14 PM #21 Text 0 File Cdrdrv.cpp, Line 9096 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 6:04:36 PM #22 Text 0 File Cdrdrv.cpp, Line 1230 18:04:36.828 - I: SONY DVD RW DW-D22A : Queue again later 6:41:38 PM #23 SPTI -1135 File SCSIPassThrough.cpp, Line 291 I: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x5C 00 00 00 00 00 00 00 0C 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x034dd800: Len xc 6:41:38 PM #24 SPTI -1023 File SCSIPassThrough.cpp, Line 291 I: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1023) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x2C Sense Qual: 0x00 CDB Data: 0x2A 00 00 1D 72 00 00 00 20 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C Buffer x05af0000: Len x10000 0x48 C8 06 61 A3 CE 8D 46 BA CA 15 21 04 D9 C2 15 0x41 8A 16 45 EE 76 5E 56 99 4A 68 A0 6A 32 EA 6D 0x26 D4 8E 2E 12 84 89 97 5D 56 D8 79 83 D9 51 D5 6:41:38 PM #25 CDR -1023 File Writer.cpp, Line 302 Command sequence error I: SONY DVD RW DW-D22A 6:41:38 PM #26 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 6:41:39 PM #27 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 6:41:39 PM #28 Text 0 File DVDR.cpp, Line 3337 EndDAO: Last written address was 1929727 6:41:39 PM #29 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) _____________________ LOG2 ------------------------------------- 1C80-0000-19E5-MA2X-4003-4074-**** Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.2.7.0 Internal Version: 7, 2, 7, 0 Recorder: <SONY> Version: BYS2 - HA 1 TA 1 - 7.2.7.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <VR0315B>Version: 2.0B - HA 1 TA 2 - 7.2.7.0 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: Off CdRomPeripheral : SAMSUNG CD-ROM SH-152A atapi Port 0 ID 1 DMA: Off CdRomPeripheral : SONY DVD RW DW-D22A atapi Port 3 ID 0 DMA: On CdRomPeripheral : VR0315B MBE331S 2.0B vaxscsi Port 4 ID 0 DMA: Off === CDRom-Device-Map === SAMSUNG CD-ROM SH-152A H: CDRom0 SONY DVD RW DW-D22A I: CDRom1 VR0315B MBE331S J: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 750MB (768748kB) Free physical memory: 374MB (383036kB) Memory in use : 50 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.10.2006 ISO compilation 5:51:59 PM #1 Text 0 File Isodoc.cpp, Line 6440 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 5:51:59 PM #2 Text 0 File ThreadedTransfer.cpp, Line 540 ReadBuffer-Pipe got 262144KB of Memory 5:51:59 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 5:51:59 PM #4 Text 0 File Writer.cpp, Line 113 Writer I: SONY DVD RW DW-D22A running 5:51:59 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 5:51:59 PM #6 Text 0 File Burncd.cpp, Line 3405 Turn on Disc-At-Once, using DVD media 5:51:59 PM #7 Text 0 File DlgWaitCD.cpp, Line 298 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2219375 (493:11.50, 4334MB) 5:51:59 PM #8 Text 0 File DlgWaitCD.cpp, Line 310 Write in overburning mode: NO (enabled: CD DVD) 5:51:59 PM #9 Text 0 File DlgWaitCD.cpp, Line 2842 Recorder: SONY DVD RW DW-D22A, Media type: DVD-R Disc Manufacturer: FUJIFI - LM03 Disc Application Code: 64, Disc Physical Code: 193 5:51:59 PM #10 Text 0 File DlgWaitCD.cpp, Line 482 >>> Protocol of DlgWaitCD activities: <<<5> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2219376 blocks [I: SONY DVD RW DW-D22A] -------------------------------------------------------------- 5:52:00 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1063 Prepare recorder [I: SONY DVD RW DW-D22A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4545282048, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2219376 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2219376 | 0 | 0x00 2219376 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 5:52:00 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 5:52:00 PM #14 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 5:52:00 PM #15 Text 0 File Burncd.cpp, Line 4236 Cache writing successful. 5:52:00 PM #16 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 5:52:00 PM #17 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 8x (11,080 KB/s) 5:52:00 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2722 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 5:52:00 PM #19 Text 0 File DVDR.cpp, Line 2965 Recording mode: Sequential Recording Mode 5:52:00 PM #20 Text 0 File DVDR.cpp, Line 3121 Start write address at LBA 0 DVD high compatibility mode: Yes 5:52:00 PM #21 Text 0 File Cdrdrv.cpp, Line 9096 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 5:54:17 PM #22 Text 0 File Cdrdrv.cpp, Line 1230 17:54:17.437 - I: SONY DVD RW DW-D22A : Queue again later 6:33:17 PM #23 SPTI -1135 File SCSIPassThrough.cpp, Line 291 I: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 20 F6 E0 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x04c80000: Len x10000 0x10 12 A2 24 FE A9 48 52 32 49 23 8D 7E 1D 41 8C 0xA0 D1 9C A9 DF F4 A4 50 DA A7 BC 1A 4F E4 0F A0 0xB9 88 8A F6 00 A4 F8 B7 24 0D 8C 84 79 23 E0 77 6:33:17 PM #24 CDR -1135 File Writer.cpp, Line 302 Write error I: SONY DVD RW DW-D22A 6:33:17 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 6:33:19 PM #26 Text 0 File DVDR.cpp, Line 3337 EndDAO: Last written address was 2160351 6:33:20 PM #27 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) _____________________ LOG3 ------------------------------------- 1C80-0000-19E5-MA2X-4003-4074-**** Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.2.7.0 Internal Version: 7, 2, 7, 0 Recorder: <SONY> Version: BYS2 - HA 1 TA 1 - 7.2.7.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <VR0315B>Version: 2.0B - HA 1 TA 2 - 7.2.7.0 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: Off CdRomPeripheral : SAMSUNG CD-ROM SH-152A atapi Port 0 ID 1 DMA: On CdRomPeripheral : SONY DVD RW DW-D22A atapi Port 3 ID 0 DMA: On CdRomPeripheral : VR0315B MBE331S 2.0B vaxscsi Port 4 ID 0 DMA: Off === CDRom-Device-Map === SAMSUNG CD-ROM SH-152A H: CDRom0 SONY DVD RW DW-D22A I: CDRom1 VR0315B MBE331S J: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 750MB (768748kB) Free physical memory: 413MB (422920kB) Memory in use : 44 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.10.2006 ISO compilation 2:00:05 PM #1 Text 0 File Isodoc.cpp, Line 6440 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 2:00:06 PM #2 Text 0 File ThreadedTransfer.cpp, Line 540 ReadBuffer-Pipe got 81920KB of Memory 2:00:06 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 2:00:06 PM #4 Text 0 File Writer.cpp, Line 113 Writer I: SONY DVD RW DW-D22A running 2:00:06 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 2:00:06 PM #6 Text 0 File Burncd.cpp, Line 3405 Turn on Disc-At-Once, using DVD media 2:00:06 PM #7 Text 0 File DlgWaitCD.cpp, Line 298 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2219375 (493:11.50, 4334MB) 2:00:06 PM #8 Text 0 File DlgWaitCD.cpp, Line 310 Write in overburning mode: NO (enabled: CD DVD) 2:00:06 PM #9 Text 0 File DlgWaitCD.cpp, Line 2842 Recorder: SONY DVD RW DW-D22A, Media type: DVD-R Disc Manufacturer: FUJIFI - LM03 Disc Application Code: 64, Disc Physical Code: 193 2:00:06 PM #10 Text 0 File DlgWaitCD.cpp, Line 482 >>> Protocol of DlgWaitCD activities: <<<2> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2219376 blocks [I: SONY DVD RW DW-D22A] -------------------------------------------------------------- 2:00:06 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1063 Prepare recorder [I: SONY DVD RW DW-D22A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4545282048, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2219376 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2219376 | 0 | 0x00 2219376 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 2:00:06 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 2:00:06 PM #14 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 2:00:06 PM #15 Text 0 File Burncd.cpp, Line 4236 Cache writing successful. 2:00:06 PM #16 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 2:00:06 PM #17 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 6x (8,310 KB/s) 2:00:07 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2722 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:00:07 PM #19 Text 0 File DVDR.cpp, Line 2965 Recording mode: Sequential Recording Mode 2:00:07 PM #20 Text 0 File DVDR.cpp, Line 3121 Start write address at LBA 0 DVD high compatibility mode: Yes 2:00:07 PM #21 Text 0 File Cdrdrv.cpp, Line 9096 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 2:01:30 PM #22 Text 0 File Cdrdrv.cpp, Line 1230 14:01:30.015 - I: SONY DVD RW DW-D22A : Queue again later 2:41:18 PM #23 SPTI -1135 File SCSIPassThrough.cpp, Line 291 I: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x5C 00 00 00 00 00 00 00 0C 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x034dd800: Len xc 2:41:18 PM #24 SPTI -1023 File SCSIPassThrough.cpp, Line 291 I: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1023) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x2C Sense Qual: 0x00 CDB Data: 0x2A 00 00 1F 26 80 00 00 20 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C Buffer x04cd0000: Len x10000 0x80 00 00 01 08 12 74 30 04 C4 D4 94 01 90 03 D0 0x07 E1 A0 05 C0 50 30 00 E9 20 18 06 24 00 9C 06 0x20 67 80 DB 00 DF 92 89 A0 63 F5 06 23 BA D6 3E 2:41:18 PM #25 CDR -1023 File Writer.cpp, Line 302 Command sequence error I: SONY DVD RW DW-D22A 2:41:18 PM #26 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 2:41:19 PM #27 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 2:41:19 PM #28 Text 0 File DVDR.cpp, Line 3337 EndDAO: Last written address was 2041471 2:41:19 PM #29 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 6x (8,310 KB/s) Existing drivers: File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ------------------------------------- end.

Ulukai · Posted: Sun Oct 15, 2006 9:15 am Post subject:

It looks like the writer has trouble writing to the media you have used. This can be either bad media, or the laser is not being able to focus or write to the media. Either use another set of media, or run a cleaning kit on the writer. If those two don't help, the writer might be getting disfunctional. Confused

CDR-Zone.COM · Advertisement Bot